192.168.100.0
Guide to 192.168.100.0 Admin Login
IP 192.168.100.0 can be assigned as the default gateway address for specific routers and modems, providing access to the device’s configuration panel. When users type this address into the browser’s address bar, it can open a local interface that allows them to take full control of their home or office network. From there, they can change the network name, set a new WiFi password, adjust security settings, track connected devices, and optimize overall performance to suit their needs.
How to Find 192.168.100.0 Admin
To access your router settings, make sure your device is connected to the same WiFi network as the router. Open a web browser like Chrome or Safari and enter 192.168.100.0 into the address bar at the top of the screen, not the search box. If this is the correct admin IP, it should open the router login page where you will be asked to enter a username and password. The default login information is provided below. After signing in, you can customize your network by changing the WiFi name or updating the password. You can also click this blue button to go directly to the login page:
192.168.100.0 is NOT commonly used for router admin access! If the link above doesn’t open a login page, your router is likely using a different IP address such as 192.168.100.1, so try this link instead:
Ordinary passwords: admin or password
If you enter https://192.168.100.0 into a search engine like Google instead of placing it in the browser’s address bar, it will be treated as a search rather than a command to connect to your router. Instead of opening the login page, you will just see a list of websites and articles about the IP address. This happens because search engines are designed to find content online, not to connect with devices on your local network. To open your router’s settings page properly, always type the IP address into the browser’s address bar at the top of the screen. This small but important step makes all the difference when trying to access your network controls.
Why 192.168.100.0?
The Internet Protocol address 192.168.100.0 is part of the reserved IP address range defined for private networks, specifically within the 192.168.0.0 to 192.168.255.255 block. These addresses are not routable on the public Internet and are instead used internally by routers, modems, and other network devices. The IP 192.168.100.0 is typically assigned as the network identifier within a local subnet, meaning it marks the starting point of a private IP range used by the router to manage connected devices. Unlike addresses such as 192.168.100.1, which are used for admin access, 192.168.100.0 is usually reserved for network structuring and not intended for direct access.
In many residential and business networks, 192.168.100.0 serves as the foundation for a class C subnet, which often spans from 192.168.100.1 to 192.168.100.254. The device at 192.168.100.1, usually the router or modem, acts as the gateway for other connected devices, enabling communication within the network and providing access online. The network address (.0) and the broadcast address (.255) are typically reserved and cannot be assigned to devices. This setup is commonly used by ISPs, especially for modems and gateways in cable or fiber-optic Internet services.
Some manufacturers, particularly those producing cable modems and ONUs (Optical Network Units), configure 192.168.100.1 as the default gateway, while the 192.168.100.0 address silently defines the range for that local area network. In these cases, the 192.168.100.0/24 subnet (meaning 255 possible IPs) ensures a clean, isolated internal network that won’t conflict with other private networks using ranges like 192.168.1.x or 192.168.0.x. This helps avoid IP conflicts when users connect multiple routers or modems within the same environment.
It’s important to note that 192.168.100.0 is usually not intended to be used in a browser to access a login page or router interface. If you try to enter it directly into Chrome, in many cases nothing will load because it’s a network-level address, not a device-specific one. For admin access, users should typically connect through a 192.168.100.1 router login, which leads to the modem’s configuration panel. Understanding this distinction is helpful for anyone managing a home or small business network, especially when troubleshooting connectivity issues or setting up a new device.
Blocking Websites
You can block unwanted or harmful websites directly through your home router’s settings by using its built-in parental controls or access restrictions. To do this, connect to your router’s Wi-Fi network, open a web browser, and enter your router’s IP address, which is likely either 192.168.100.0 or 192.168.100.1, into the address bar. After logging in with your admin credentials, look for a section labeled “Parental Controls,” “Access Restrictions,” or “URL Filtering.” From there, you can enter the web addresses of the sites you want to block. Once saved, the router will prevent all devices connected to your network from accessing those websites, offering an easy way to protect your household from inappropriate or dangerous content.
198.168.100.0
The IP address 198.168.100.0 is incorrect for accessing a home router because it does not fall within the range of private IP addresses reserved for local networks. Private IP addresses typically start with 192.168.x.x, 10.x.x.x, or 172.16.x.x to 172.31.x.x. The address 198.168.100.0 is part of the public IP space, which is assigned by global Internet authorities and not meant for internal network use. If you try to enter this address in your browser to reach your router settings, it will likely fail or redirect, since routers are not configured to use public IPs for admin access. To get the correct private IP, reverse the first number and the second number so you get 192.168.100.0 which is credible.